Heated Glass & Metal Plates

2-Channel Temperature Controller with 4.3” touch screen interface compatible with all H401 heating devices. One controller can control independently up to two items.

External temperature sensor (included) and self calibration routines allows easy calibration of the heating devices for the highest accuracy on sample temperature.

On board data logging and download procedures to USB drives allow to record temperature as a function of time and to log calibration events and alarms.

The controller is equipped with password protected routines to re-calibrate the sensors against certified thermometers.

• T – range: from ambient to 60°C
• T – accuracy on specimen: ± 0.3°C
• External T – sensor (included).
• On-board Data logging and download routines to USB drive.
• On-board logging of calibration and alarm events.
• Alarm buzzer and External Alarm Connector.
• One controller can control independently up to two devices.
• Self calibration routines allow to improve temperature accuracy.
• Password protected procedure for periodic calibration against certified thermometer

• T – range: from ambient to 60°C
• T – accuracy on specimen: ± 0.3°C
• Single Channel
• One-Point Temperature Calibration and Adjustment

Compatible with the following XY stages: Nikon T/Ti-SR. This ITO glass plate fits in the circular opening of the XY stage and creates a flat temperature controlled surface at the same height as the rest of the XY stage. Aluminium frame for superior resistance and flatness. Glass thickness 0.5 mm. Plate diameter 108mm.

The plate does not change the microscope focal plane.

Compatible with all the stereo microscopes on the market. This ITO glass table realizes a flat and transparent surface at controlled temperature. Glass thickness 2 mm.

Table dimensions: 440 x 235 mm (working area 320 x 160 mm)

Table height: variable from 31 to 37 mm and from 75 to 105 mm

Glass thickness: 2 mm

This metal plate fits in the insert of the NI-S-E-motorized stage and creates a flat temperature controlled surface.

It features a trimmed 27 mm diameter circular observation opening for imaging.

Compatible with the following XY Olympus stages: IX-SUSP, GX-SVR, GX-SFR, BX3-SSU, IX2-SFR, IX2-SVL-2. This metal plate fits in the circular opening of the XY stage and creates a flat temperature controlled surface at the same height as the rest of the XY stage. It features a trimmed 24 mm diameter circular observation opening for imaging. It is compatible with oil immersion lenses.

This plate does not change the focal plane.

Circular observation opening: 24 mm.